Install bumper cover, front

Install the bumper cover (2) and engage in the detents in the area of the dashed line.
Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Upper bumper cover on air flap control
screw	Tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the left and right side.

TIGHTENING TORQUE SPECIFICATIONS

Front bumper cover on side wall
Hexagon screw	Tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Connect and lock the plug (1) into the left wheel well.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect and lock the plug (1) into the right wheel well.

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Undershield/frame
Hexagon screw	tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work