Partially installing the left front and right wheel arch trim

NOTE: Description is for left component only. Procedure on the right side is identical.

Partly install the front wheel arch trim

Check

Check the clips (2) for damage and replace where required.
The sealing ring must not be damaged or missing.
Check detents (1) for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result

» The detents (1) of the wheel arch trim are damaged.

Measure

Engage the wheel arch trim (1) into the detents (2) in the area of the bumper cover.

Courtesy of BMW OF NORTH AMERICA, INC.