Installing the belt tensioner
WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
- Position belt tensioner (1) .
- Tighten the screw on the belt tensioner with a suitable socket wrench (2) .
TIGHTENING TORQUES SPECIFICATION
| Belt tensioner | ||
|---|---|---|
| M10 | Tightening torque | 40 Nm |
Follow-up work
- Refer to INSTALLING DRIVE BELT
- Refer to INSTALLING THE COOLANT EXPANSION TANK FOR THE LOW-TEMPERATURE COOLANT CIRCUIT
- Refer to INSTALLING FAN COWL
- Refer to INSTALLING THE LEFT UNFILTERED-AIR DUCT
- Refer to INSTALLING INTAKE FILTER HOUSING
- Refer to INSTALLING THE RIGHT STRUT BRACE
- Refer to INSTALLING THE STRUT BRACE
- Refer to INSTALLING ACOUSTIC COVER
- Refer to INSTALLING THE REAR TOP CROSS CONNECTION
- Refer to INSTALLING TENSION STRUT ON LEFT AND RIGHT SHOCK TOWER
- Refer to INSTALLING UPPER CROSS CONNECTION
- Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT AND RIGHT