Removing the drive for the backrest angle adjustment

Preliminary work 

• Refer to REMOVING THE RIGHT SEAT .
• Refer to REMOVING THE HEAD RESTRAINT .
• Refer to REMOVING THE GUIDE SLEEVES FOR THE REAR HEAD RESTRAINT .
• Refer to REMOVING THE COVERS FOR THE SEAT ADJUSTMENT SWITCH .
• Refer to REMOVING THE REAR PANEL ON RIGHT REAR SEAT BACKREST .
• Refer to REMOVING THE BACKREST COVER WITH THE CUSHION .

• Loosen screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Push back the drive linkage (1) in the direction of arrow until the drive for the backrest tilt adjustment is free.
• Unlock plug connection (2) and disconnect.
• Remove the drivetrain for backrest tilt adjustment (3).

  Courtesy of BMW OF NORTH AMERICA, INC.