install the vibration absorber on the trunk lid
- Position the vibration absorber (2) on the tailgate.
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Vibration absorber to tailgate | ||
|---|---|---|
| M6 screw | Tightening torque | 8 Nm |
Follow-up work
- Refer to INSTALLING REAR WINDOW WIPER MOTOR .
- Refer to INSTALLING THE TAILGATE TRIM PANEL .
- Refer to INSTALLING TRUNK COMPARTMENT LIGHT ON TRUNK LID .
- Refer to INSTALLING THE POWER TAILGATE SWITCH .
- Refer to INSTALLING THE TRIM FOR THE LEFT AND RIGHT SIDE REAR WINDOW FRAME .
- Refer to INSTALL THE TRIM FOR THE TOP REAR WINDOW FRAME .
- Refer to INSTALLING WIPER ARM OF THE REAR WIPER .