Install rear spoiler
- Check the threaded bolts (1) and the clips (3) on rear spoiler (2) for damage; replace if necessary.
- Position rear spoiler (1) and clip in with clips (2).
- Tighten nuts (1).
TIGHTENING TORQUE SPECIFICATIONS
| Rear spoiler to trunk lid | ||
| M6 hexagon nut | Tightening torque | 6 Nm |
Follow-up work
- Refer to INSTALLING BOTH TRIM PIECES FOR THE REAR WINDOW FRAME .
- Refer to INSTALLING THE TOP TRIM FOR THE REAR WINDOW FRAME .
- Refer to INSTALLING THE REAR STORAGE SHELF .