Install both trim pieces for the rear window frame
NOTE:
Description is for left component only. Procedure on the right side is identical.
Install the trim for the rear window frame
Check
- Check the clips (1) for damage and replace if necessary.
- Check the detent (2) on the trim for the rear window frame for damage.
Result
» The detent (2) is damaged.
Measure
- Replace the trim for the rear window frame.
- Clip in the trim for the rear window frame (1) in the clips (3) and the detent (2).
- Tighten down screw (2).
TIGHTENING TORQUES SPECIFICATION
| Trim for rear window frame to trunk lid | ||
|---|---|---|
| Oval-head screw | Tightening torque | 1.5 Nm |
- Tighten the ball pin (1).
TIGHTENING TORQUES SPECIFICATION
| Pin for rear shelf to tailgate | ||
|---|---|---|
| Ball pin | Tightening torque | 7 Nm |