Installing the front wheel speed sensor

Clean bore for wheel RPM sensor and grease using lubricating grease (see applicable BMW parts catalogue).

CONSUMABLE SPECIFICATION

Lubricating grease Staburags NBU 12K

100 g, Tube

83 23 9 407 810

Install rear wheel speed sensor (2).
Position and tighten the screw (1).
Connect the cable of the wheel RPM sensor in the holders (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Connect the cable of the wheel RPM sensor in the holders (1).
Connect connector and close the housing cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work