Installing the license plate light on left and right

NOTE: Description is for left component only. Procedure on the right side is identical.

Install number plate light

Check the clamp (1) on the license plate light (2) for damage.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect connectors and lock.
Position license plate light (1) and clip in with clamp (2).

G14995632

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE COVER ON REAR BUMPER COVER .
Refer to INSTALLING THE REAR BUMPER COVER .
Refer to INSTALLING RIGHT REAR REFLECTOR .
Refer to INSTALLING LEFT REAR REFLECTOR .
Refer to INSTALLING THE TRIM IN THE WATER CHANNEL ON THE LEFT AND RIGHT .
Refer to INSTALLING THE TAIL LIGHT ON THE LEFT AND RIGHT SIDE PANEL .
Refer to INSTALLING BOTH BOTTOM D-PILLAR TRIM PANELS .
Refer to INSTALLING THE WARNING TRIANGLE .
Refer to INSTALLING THE LEFT AND RIGHT FLAP IN THE LUGGAGE COMPARTMENT TRIM PANEL .