Install reinforcement strut
- Feed in reinforcement strut (2).
- Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Front reinforcement strut | ||
| screw | Tightening torque | 24 Nm |
Follow-up work
- Refer to INSTALLING THE TOP AIR FLAP CONTROL/AIR DUCT .
- Refer to INSTALLING THE FRONT HOOD SEAL .
- Refer to INSTALLING BUMPER COVER, FRONT .
- Refer to PARTIALLY INSTALLING THE FRONT SECTIONS OF BOTH WHEEL ARCH COVERS AT THE FRONT .
- Refer to PARTIALLY INSTALLING THE LEFT AND RIGHT FRONT WHEEL ARCH TRIM .
- Refer to INSTALLING FRONT ORNAMENTAL GRILLE .