Installing loading edge trim

• Check clamps (1) on loading edge trim (2) for damage, replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed loading edge trim (2) in beneath sealing lip of tailgate seal.
• Clip in loading edge trim (2) with clamps (3).
• Secure expanding rivet (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE STORAGE TRAY .
• Refer to INSTALLING BOTH BOTTOM D-PILLAR TRIM PANELS .
• Refer to INSTALLING THE WARNING TRIANGLE .
• Refer to INSTALLING THE LEFT AND RIGHT FLAP IN THE LUGGAGE COMPARTMENT TRIM PANEL .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .