Install luggage compartment capping
- Clip the holder of the vehicle wiring harness into the luggage compartment capping (3) and connect and lock the associated connector.
- Feed in luggage compartment (3) and position.
- Tighten screws (2).
TIGHTENING TORQUE SPECIFICATIONS
| Luggage compartment to body | ||
| Thermoplastic oval-head screw | Tightening torque | 3 Nm |
- Fasten expanding rivet (1).
- For equipment specification with backrest remote unlocking.
- Attach Bowden cable (1) in luggage compartment (2).
Follow-up work
- Refer to INSTALLING D-PILLAR TRIM PANEL .
- Refer to INSTALLING C-PILLAR TRIM PANEL .
- Refer to INSTALLING TRIM PANEL OF LUGGAGE COMPARTMENT .
- Refer to INSTALLING LUGGAGE COMPARTMENT LAMP IN LUGGAGE COMPARTMENT .
- Refer to INSTALLING COVER FOR LUGGAGE COMPARTMENT .
- Refer to INSTALLING THE BOTTOM D-PILLAR TRIM PANEL .
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Refer to INSTALLING THE COVER OF THE SEAT BELT FINISHER STRIP .
- Refer to INSTALLING THE WARNING TRIANGLE .
- Refer to INSTALLING THE FLAP IN THE LEFT LUGGAGE COMPARTMENT TRIM PANEL .
- Refer to INSTALLING THE FRONT STORAGE SHELF .