Installing C-pillar trim panel

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Check the clamps (1) on the C-pillar trim panel (2) for damage and replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the C-pillar trim panel (2) insert it below the sealing lip of the door weather strip and clip it in with the clamps (3).
Tighten down screw.

TIGHTENING TORQUE SPECIFICATIONS

C-pillar trim panel to body
Sheet metal screw 8 x 38	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work