Install the rear window

• Remove the remaining guide pins (1) and Dual Lock tape (2).
• Clean bonding surface.
• Stick new Dual Lock tape (2) on at marks on body area.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clean bonding surface on side window (2).
• Overview for side window bonding: 

  a [mm] = width of adhesive bead	8±1
  b [mm] = height of adhesive bead	15±1

• Apply adhesive bead (1) continuously around PVC coating (2).

  For reuse of the side window glass, apply the adhesive bead to the cut back adhesive bead of the side window glass.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position side window (1) on side panel, and feed in with guide pins (2).
• Align side window (1) on side panel, and engage in Dual Lock tape.
• Secure the side window (1) with the yellow plastic adhesive tape.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TRIM STRIP AT THE REAR WINDOW .
• Refer to INSTALLING D-PILLAR TRIM PANEL .
• Refer to INSTALLING C-PILLAR TRIM PANEL .
• Refer to INSTALLING TRIM PANEL OF LUGGAGE COMPARTMENT .
• Refer to INSTALLING LUGGAGE COMPARTMENT LAMP IN LUGGAGE COMPARTMENT .
• Refer to INSTALLING COVER FOR LUGGAGE COMPARTMENT .
• Refer to INSTALLING THE BOTTOM D-PILLAR TRIM PANEL .
• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
• Refer to INSTALLING THE COVER OF THE SEAT BELT FINISHER STRIP .
• Refer to INSTALLING THE WARNING TRIANGLE .
• Refer to INSTALLING THE FLAP IN THE LEFT LUGGAGE COMPARTMENT TRIM PANEL .
• Refer to INSTALLING THE FRONT STORAGE SHELF .