Installing the throttle body

• Replace sealing ring (1).

  Parts:  Sealing ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace sealing ring (1).

  Parts:  Sealing ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in and install the throttle body (3).
• Connect and lock the connector (2).
• Tighten screws (arrows).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Throttle body to intake plenum
  M6X50	Tightening torque	7 Nm

• Tighten down screw (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Throttle body to holder
  M6X25	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install charge air line (1).
• Tighten screws (arrows).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Charge air line to throttle body
  M6	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1).
• Connect and lock the connector (2).
• Secure clamps (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install RESONATOR .
• Install ACOUSTIC COVER .