Installing fan cowl

• Feed in and install the fan cowl (4) in the direction of the arrow.
• Lock the left and right locks (arrows).
• Pin up connector (1) and lock audibly.
• Secure clip (2) on the fan cowl.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fasten the clamp (1) to the fan cowl (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fasten the clamp (1) to the fan cowl (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fasten the clamp (1) to the fan cowl (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
• Refer to INSTALLING THE SEAL FOR THE HOOD GASKET LEFT AND RIGHT .
• Refer to INSTALLING THE COVER PANEL OF THE ENGINE COMPARTMENT ON THE REAR LEFT AND RIGHT .
• Refer to INSTALLING FRONT-END STRUT ON LEFT AND RIGHT .
• Refer to INSTALLING FRONT CROSS CONNECTION .
• Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT AND RIGHT .
• Refer to INSTALLING FRONT UNDERBODY PROTECTION .