Installing the trim panel of the rear luggage compartment
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Connect connectors and lock.
- Position the trim panel (2) of the luggage compartment.
- Tighten the screws (1).TIGHTENING TORQUE SPECIFICATIONS
Luggage compartment trim panel to body Thermoplastic oval-head screw Tightening torque 2.6 Nm
Follow-up work
- Refer to INSTALLING THE BOTTOM RIGHT D-PILLAR TRIM PANEL .
- Refer to INSTALLING D-PILLAR TRIM PANEL .
- Refer to INSTALLING C-PILLAR TRIM PANEL .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
- Refer to INSTALLING THE BACKREST SIDE SECTION ON RIGHT REAR SEAT BACKREST .
- Refer to INSTALLING RIGHT SEAT BELT FINISHER STRIP COVER .
- Refer to INSTALLING THE FLAP IN THE RIGHT LUGGAGE COMPARTMENT TRIM PANEL .
- Refer to INSTALLING ROLLER COVER FOR LUGGAGE COMPARTMENT .