Removing right luggage compartment wheel arch trim panel

Preliminary work 

• Refer to REMOVING TRIM PANEL FOR STORAGE SHELF (PARCEL SHELF) .
• Refer to REMOVING THE LUGGAGE COMPARTMENT REMOVABLE PANEL .
• Refer to REMOVING THE LOADING EDGE TRIM .
• Refer to REMOVING THE COMPACT SPARE WHEEL .
• Refer to REMOVING THE VEHICLE TOOL KIT .
• Refer to REMOVING THE HOOK AND LOOP TAPE FOR THE VEHICLE TOOL KIT .
• Refer to REMOVING THE LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to REMOVING THE 12 V POWER SOCKET MOUNT .
• Refer to REMOVING THE TRUNK COMPARTMENT LIGHT .

• Release the storage net (1) from the latch mechanism (2) in the direction of arrow and fold up.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove storage compartment (1) out of the luggage compartment wheel arch trim panel in the direction of arrow using a suitable tool (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unclip covers (1).
• Unscrew the bolts (2) and remove the lashing points (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
• Pull the luggage compartment wheel arch trim panel (1) on the bottom in the direction of the arrow and guide it out of the guides (2) and the C-pillar trim panel and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.