63 21 030 Replacing bulb holder for left or right rear light (side panel)
Necessary preliminary work:
- Remove the REAR LIGHT
Removal:
Unlock and disconnect corresponding connector as necessary.
Press the locks (1) together to disengage them.
Remove the bulb socket (2) from the rear light.
Replacement:
Remount the bulbs (1; 2).
Do this by carefully pressing bulbs (1; 2) into bulb holder (3) and turning anti-clockwise.
Then pull out bulb (1; 2) from bulb holder (3).
Insert bulb (1; 2) into new part of bulb holder (3).
Then carefully press bulb (1; 2) into bulb holder (3) and press to the right up to the limit position.
Installation:
Insert the bulb socket (2) into the rear light.
Connect corresponding connector as necessary.
NOTE:
Ensure bulb holder (2) is correctly locked (1) and fitted in rear light.
Necessary Follow-up work:
- Install the REAR LIGHT