Removing and installing/replacing rear (inside) left or right door sill cover strip (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 317
Necessary preliminary tasks:
- Release REAR SEAT .
Release expansion rivet (1).
Release clips (2) on door sill cover strip (3) with special tool 00 9 317.
Pull door sill cover strip (3) up and remove.
Installation note:
Replace faulty clips (1).
Fit door sill cover strip (2) with preinstalled clips (1).