Removing and installing/replacing rear seat (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Unclip rear seat on left and right towards top.
Installation note:
Feed seat belt buckles (1) into recesses in rear seat.
Release screw (1) from seat belt end fitting (2), center.
Tightening torque 72 11 22AZ .
Feed out the end fitting from the rear seat.
Lift out rear seat.
Installation note:
End fitting is coded against incorrect assembly.