Installing the oil-level sensor
- Clean sealing surface on oil sump.
- Position the oil-level sensor (3).
- Tighten nuts (2).
TIGHTENING TORQUES SPECIFICATION
| Oil-level sensor | ||
| Nut M6 | Tightening torque | 8.4 Nm |
- Connect plug connection (1) and lock.
Follow-up work
- Refer to TOPPING UP MOTOR OIL .
- Refer to CHECKING ENGINE OIL LEVEL .
- Refer to INSTALLING THE STIFFENING PLATE .
- Refer to INSTALLING FRONT UNDERBODY PROTECTION .