Removing holder of DME control unit for cylinders 5 to 8

NOTE: RISK OF DAMAGE
Electrostatic discharge .
Damage to or destruction of electrical components .

Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always
package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060.
Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
For additional information see: 61 35... NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION

Preliminary work

Unlock and disconnect plug connections (1).
Loosen the cable clip (2) upwards from the adapter plate.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen the cable clip (1).
Loosen screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen connector holder (1) upwards.

Courtesy of BMW OF NORTH AMERICA, INC.