Installing holder of the DME control unit for cylinders 5 to 8

• Carefully push the holder of the refrigerant line (3) aside.
• Insert holder with the DME control unit of cylinders 5 to 8 (2) and position.
• Engage the connector bracket (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Ensure that the centering pin (2) is located in the lug (1) on the left spring support.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Engage the cable bracket (1).
• Tighten down screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.
• Engage the cable bracket (2) in the adapter plate.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE COVER PANEL OF THE SLAVE DME CONTROL UNIT .
• Refer to CONNECTING BATTERY GROUND LEAD .