Install the DME control unit of cylinders 1 to 4

• Position the DME control unit (1).
• Lock the adapter plate to the detents (2) in the master control unit support.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Engage the wires and connectors (1) to the adapter plate.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING ACOUSTIC COVER .
• Installing the cover panel of the master DME control unit.

  Courtesy of BMW OF NORTH AMERICA, INC.

  • Position the cover of the master DME control unit (1)
  • Engage the cover panel of the master DME control unit (1) downwards with the clamps (2) and the guide pins (3) in the carrier plate of the DME.
• Refer to INSTALLING THE COVER PANEL OF THE SLAVE DME CONTROL UNIT .
• Refer to CONNECTING BATTERY GROUND LEAD .
• Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .
• Refer to PERFORM INJECTION QUANTITY COMPENSATION .