Install the Soft-close motor
- Attach the Bowden cable (1)
from the Automatic Soft Close drive (3)
on the door lock (2)
.
- Install cover (1)
and engage the clips (2)
.
Follow-up work
- Refer to INSTALLING THE DOOR LOCKING OF THE DRIVER'S DOOR .
- Refer to INSTALLING THE FRONT OUTSIDE DOOR HANDLE .
- Refer to INSTALLING THE MODULE BRACKET ON THE FRONT DOOR .
- Refer to INSTALLING THE WEATHER STRIP ON THE FRONT DOOR .
- Refer to INSTALLING FRONT DOOR TRIM PANEL .
- Refer to ATTACHING THE COVER TO THE DOOR HANDLE .
- Refer to FITTING VEHICLE EXTERIOR MIRROR .
- Refer to INSTALLING THE MIRROR TRIANGLE COVER .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .