Installing the support for dashboard

• Carefully install the support for the dashboard in the vehicle.
• Carefully feed in the support for the dashboard.

  If necessary, connect and lock any associated connectors.

• Tighten nuts (1)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Heating and air-conditioning unit on support
  Nut M6	tightening torque	4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount the left and right angle brackets.

  Tighten nuts (2)  .

  TIGHTENING TORQUE SPECIFICATION
  
  

  Support for dashboard
  hexagon nut M8	tightening torque	21 Nm
  Hexagon screw	tightening torque	21 Nm

• Tighten the nuts (3)  and install the cable brackets.
  TIGHTENING TORQUE SPECIFICATION
  
  

  Support for dashboard
  hexagon nut M8	tightening torque	21 Nm
  Hexagon screw	tightening torque	21 Nm

• Connect the connector (1)  to the airbag control unit and lock it.
• Attach the wiring harness (2)  to the holders.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the head unit (1)  .
• Connect and lock all connectors in marked area.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the head unit.
• Tighten down screws (1)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Head unit on holder/holder on support
  Screw	tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Correctly position the steering column (2)  and tighten the nuts (1)  in the order (1)  , (2)  , (3)  and (4)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Steering column to dashboard support
  M8 Observe tightening sequence.	Tightening torque	21.4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1)  and lock.
• Attach the wiring harness (2)  to the steering column.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the nut (1)  in the footwell at left on the heating and air-conditioning unit.
  TIGHTENING TORQUE SPECIFICATION
  
  

  Heating and air-conditioning unit on support
  Nut M6	tightening torque	4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (1)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Support for dashboard
  hexagon nut M8	tightening torque	21 Nm
  Hexagon screw	tightening torque	21 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten nuts (1)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Support for dashboard
  hexagon nut M8	tightening torque	21 Nm
  Hexagon screw	tightening torque	21 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten nuts (1)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Support for dashboard
  hexagon nut M8	tightening torque	21 Nm
  Hexagon screw	tightening torque	21 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the nut (2)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Heating and air-conditioning unit on support
  Nut M6	tightening torque	4 Nm

• Connect and lock the connector (1)  on the blower motor.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1)  and lock.
• Correctly position the carpet in area of B-pillar at right.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Push the refrigerant line (1)  slightly to one side and tighten the screw (2)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Support for dashboard
  hexagon nut M8	tightening torque	21 Nm
  Hexagon screw	tightening torque	21 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE HEAD-UP DISPLAY .
• Refer to INSTALLING LEFT AIR DUCT .
• Refer to INSTALLING KNEE AIRBAG .
• Refer to INSTALLING SIDE TRIM PANEL IN FOOTWELL ON RIGHT A-PILLAR .
• Refer to INSTALLING INSIDE RIGHT DOOR SILL COVER STRIP .
• Refer to INSTALLING THE TRIM PANEL FOR THE DASHBOARD .
• Refer to INSTALLING THE SPEAKER HOLDER ON THE DASHBOARD .
• Refer to INSTALLING THE SPEAKER TRIM AT THE DASHBOARD .
• Refer to INSTALLING AUDIO CONTROL UNIT .
• Refer to INSTALLING THE INSTRUMENT CLUSTER (KOMBI) .
• Refer to INSTALLING THE STEERING COLUMN SWITCH CLUSTER (SZL) .
• Refer to INSTALLING STEERING COLUMN SHROUD LOWER SECTION .
• Refer to FITTING STEERING COLUMN SHROUD UPPER SECTION .
• Refer to INSTALLING SPORTS STEERING WHEEL .
• Refer to INSTALLING THE STEERING WHEEL/M SPORT STEERING WHEEL .
• Refer to INSTALLING AIRBAG UNIT .
• Refer to INSTALLING THE AIRBAG UNIT (M SPORT STEERING WHEEL) .
• Refer to INSTALLING THE CENTRAL INFORMATION DISPLAY (CID) .
• Refer to INSTALLING THE DECORATIVE STRIP ON THE RIGHT DASHBOARD .
• Refer to INSTALLING THE DECORATIVE STRIP ON THE DASHBOARD ON THE LEFT .
• Refer to INSTALLING RIGHT FOOTWELL TRIM .
• Refer to INSTALLING FOLD-OUT COMPARTMENT ON THE LEFT .
• Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
• Refer to INSTALLING A-PILLAR TRIM PANEL, LEFT AND RIGHT .
• Refer to INSTALLING THE SIDE PANEL ON LEFT DASHBOARD .
• Refer to INSTALLING THE SIDE PANEL ON DASHBOARD ON THE RIGHT .
• Refer to INSTALLING THE CENTER CONSOLE .
• Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
• Refer to INSTALLING THE STORAGE COMPARTMENT IN THE FRONT CENTER CONSOLE .
• Refer to INSTALLING THE OPERATING FACILITY IN THE CENTER CONSOLE .
• Refer to INSTALLING THE WIRELESS CHARGING STORAGE .
• Refer to INSTALLING THE DECORATIVE TRIM ON THE LEFT AND RIGHT OF THE CENTER CONSOLE .
• Refer to INSTALLING THE CENTER CONSOLE TRIM .
• Refer to INSTALLING TRIM IN STORAGE COMPARTMENT OF CENTER ARMREST .
• Refer to INSTALLING THE CUP HOLDER .
• Refer to INSTALLING THE TRIM FOR THE HEAD-UP DISPLAY .