Installing the oil pressure switch

• Guide in and install oil pressure switch (2).
• Tighten oil pressure switch (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1).

  The connector (1) must engage audibly.

  • Insert and install the holder (2).
  • Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SUPPORT FOR THE UNDERBODY PROTECTION .
• Refer to INSTALLING THE FRONT UNDERBODY PROTECTION .
• Refer to INSTALLING UNDERBODY PROTECTION AT REAR .
• Refer to CHECKING ENGINE OIL LEVEL .