LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
M240i 2D Convertible, Automatic Trans
>>
Repair and Diagnosis
>>
Electrical
>>
Gauges
>>
Body Equipment -- Repair (F22 & F23)
>>
51 47 Floor-Trunk-Engine Compartment-Trim Panel
>>
51 47 490 Removing and installing/replacing underbody protection (front) (2' Series coupe and convertible, 2017-2021)
>>
Installing the front underbody protection
Installing the front underbody protection
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
Position the front underbody protection (3).
Tighten the screws along the line (2).
Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATIONS
Underbody protection, front
Screw not metric thread
Tightening torque
3 Nm
M6 screw
Tightening torque
8.8 Nm
Nut
Tightening torque
2.5 Nm
Courtesy of BMW OF NORTH AMERICA, INC.