Install the left and right transverse control arm

Install the control link 

• Position the control link (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Make sure that, while installing the toe link (1), the conical side (2) of the rubber mount points in the direction of the wheel carrier (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  Tighten the screw connection in the NORMAL POSITION .
• Replace screws (1) and (2).

  Parts:  Screws

• Insert the bolts (1) and (2) and screw in by hand force.
• Tighten the screw (1) in NORMAL POSITION .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Control link to control link bearing bracket
  M12 Replace screw. Tighten in normal position.	Joining torque	100 Nm
  	Angle of rotation	90°

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screw (2) in NORMAL POSITION .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Track arm to wheel carrier
  M14 Replace screw. Tighten in normal position.	Joining torque	165 Nm
  	Angle of rotation	90°