Installing the grooved ball bearing in the propeller shaft center bearing
- Lubricate the rubber-coated bearing carrier of the propeller shaft center bearing (1)
with lubricant.
Consumable Installation aid (Circo Light; lubricant) 250 ml, Bottle 8319240582! - Press in the grooved ball bearing using special tools 0 492 262 (33 3 202)
and 0 492 263 (33 3 203)
into the propeller shaft center bearing (1)
.
Follow-up work
- Refer to INSTALLING THE CENTRAL MOUNT OF THE PROP SHAFT .
- Refer to INSTALLING THE COMPLETE PROP SHAFT .
- Refer to INSTALLING THE HEAT SHIELDS .
- Refer to INSTALLING THE COMPLETE EXHAUST SYSTEM .
- Refer to INSTALLING THE REAR DIFFUSER .
- Refer to INSTALLING CENTER STIFFENING PLATE .
- Refer to INSTALLING TANK COVER ON LEFT AND RIGHT .