Removing the wheel bearing

Preliminary work 

• Refer to REMOVING THE WHEEL .
• Refer to REMOVING THE COVER OF THE CAMBER CONTROL ARM .
• Refer to IF INSTALLED: REMOVING THE HUB CAP .
• Refer to LOOSENING THE OUTPUT SHAFT FROM THE WHEEL BEARING .
• Refer to RELEASING THE REAR BRAKE CALIPER .
• Refer to REMOVING REAR BRAKE ROTOR .

• Release the spherical-collar screws (1) with the special tool 2 472 903 .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the wheel bearing (1).

  Courtesy of BMW OF NORTH AMERICA, INC.