Replacing the trim panel for the rear shelf

Preliminary work 

• Refer to REMOVING BOTH BACKREST SIDE SECTIONS .
• Refer to REMOVING THE LEFT AND RIGHT SEAT BELT FINISHER STRIP .
• Refer to REMOVING RIGHT C-PILLAR TRIM PANEL LEFT AND RIGHT .
• Refer to REMOVING THE TWEETER ON THE REAR LEFT AND RIGHT .
• Refer to REMOVING THE TRIM PANEL FOR THE STORAGE SHELF .

• Release the locks (1) and guide out the upper retaining strap cover (2).
• Replace the trim panel for the rear shelf.

  Parts:  Trim panel for the rear shelf

• Clip the upper retaining strap cover (2) into the trim panel for the rear shelf.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the plastic nut (1) and remove the belt holder (2).
• Insert the belt holder (2) into the trim panel for the rear shelf and fasten it with the plastic nut (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TRIM PANEL FOR THE STORAGE SHELF .
• Refer to INSTALLING THE REAR LEFT AND RIGHT TWEETERS .
• Refer to INSTALLING THE C-PILLAR TRIM PANEL ON THE LEFT AND RIGHT .
• Refer to INSTALLING THE LEFT AND RIGHT SEAT BELT FINISHER STRIP .
• Refer to INSTALLING BOTH BACKREST SIDE SECTIONS .