Install expansion valve
- Replace O-rings.
Parts: O-rings
- Correctly position the expansion valves (2) .
- Tighten down screws (1)
.TIGHTENING TORQUES SPECIFICATION
Expansion valve to heater - A/C M5 tightening torque 5.5 Nm
Follow-up work
- Refer to CONNECTING THE REFRIGERANT LINE TO THE EXPANSION VALVE .
- Refer to ATTACHING THE INTAKE PIPE BRACKET .
- Refer to INSTALLING LEFT INTAKE FILTER HOUSING WITH LEFT FRONT-END STRUT .
- Refer to INSTALLING COOLANT EXPANSION TANK .
- Refer to INSTALLING THE CONTROL UNIT BRACKET FOR CYLINDERS 5 TO 8 .
- Refer to INSTALLING CLEAN AIR PIPE, TOP .
- Refer to INSTALLING THE COVER OF THE LEFT DME CONTROL UNIT .
- Refer to INSTALLING ACOUSTIC COVER .
- Refer to CONNECTING ALL BATTERY GROUND LEADS .
- Refer to EVACUATING AND CHARGING CONDITIONING .