Install fan cowl

• Maneuver the fan cowl (4) in the arrow direction and install it.
• Lock the left and right locks (arrows).
• Plug in the connector (1) and lock audibly.
• Attach clip (2) to fan cowl.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure right bottom coolant line at the fan cowl with the clamp (1).
• Audibly lock the clamp (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure left bottom coolant line at the fan cowl with the clamp (1).
• Audibly lock the clamp (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: The following step(s) must be performed if the specified component(s) is/are installed.
• Attach the coolant line at the air conditioning condenser and use clamps (1) to secure at fan cowl.
• Lock clamps (1) audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: The following step(s) must be performed if the specified component(s) is/are installed.
• Secure coolant line at the air conditioning condenser with the clamp (1).
• Audibly lock the clamp (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
• Refer to INSTALLING MOUNT OF HOOD SEAL ON THE LEFT AND RIGHT .
• Refer to INSTALLING THE COVER PANEL OF THE ENGINE COMPARTMENT ON THE REAR LEFT AND RIGHT .
• Refer to INSTALLING FRONT-END STRUT ON LEFT AND RIGHT .
• Refer to INSTALLING FRONT CROSS CONNECTION .
• Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT AND RIGHT .
• Refer to INSTALLING FRONT UNDERBODY PROTECTION .