Installing the acoustic cover for the engine, front
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
- Check the acoustic cover (2) in the marked areas (1) for damage and replace if necessary.
- Thread in and position the acoustic cover (2).
- Mount all the expanding rivets (1).
- Feed in the wiring harness section (3) and position.
- Secure clamps (2).
- Connect connectors (1) and lock.
The connector (1) must engage audibly.
- Secure clamps (1).
Follow-up work
- Refer to INSTALLING RESONATOR .
- Refer to INSTALLING ACOUSTIC COVER .