Install resonator

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.

Make sure that the holder (6) is not damaged when installing the resonator (4).
Insert the resonator (4) into rubber mount (5) and install.
The resonator (4) must engage audibly in the rubber mount (5).

Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Resonator to intake filter housing
screw	Tightening torque	2.8 Nm

Tighten clamp (3).

TIGHTENING TORQUE SPECIFICATIONS

Resonator to clean air pipe
cl.	tightening torque	3 Nm

Secure the clamp (1).

Courtesy of BMW OF NORTH AMERICA, INC.