Install fan cowl

• Feed in and install the fan cowl (3) in the direction of the arrow.
• Tighten the screws (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1).

  The connector (1) must engage audibly.

• If fitted: 

  Fasten the coolant line (1) below at the fan cowl with the clamps.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in and install coolant line (2).
• Lock clamps (1).

  The clamps (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
• Refer to INSTALLING UPPER CROSS CONNECTION .
• Refer to INSTALLING THE RIGHT FRONT-END STRUT .
• Refer to INSTALLING THE FRONT-END STRUT .
• Refer to INSTALLING THE CENTER ENGINE COMPARTMENT COVER .