Remove the seat belt finisher strip

Preliminary work 

• Refer to REMOVING THE INNER DOOR SILL COVER STRIP .
• Refer to REMOVING REAR SEAT BENCH .
• Refer to REMOVING REAR SIDE TRIM PANEL .

• Release the screw (1) at the strap fitting of the safety belt (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unclip clip (2).
• Remove seat belt finisher strip (1) from the detents (3).
• Insert the seat belt finisher strip (1) from the guide (4) to the front.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unclip clip (1).
• Remove the belt feed (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed the belt feed (1) out of the safety belt.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed the safety belt (2) out of the seat belt finisher strip (1).

Courtesy of BMW OF NORTH AMERICA, INC.