Removing the B-pillar trim panel
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING THE INNER DOOR SILL COVER STRIP .
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVING REAR SIDE TRIM PANEL .
- Remove the cover cap (1) and release the screw (2).
- Unclip clips (2).
- Feed the B-pillar trim panel (1) out of the edge protection lip and the guides (3) in the arrow direction.
- Feed the upper seat belt (2) out of the B-pillar trim panel (1).