Remove the window channel strip at the door inside rear

Preliminary work 

• Refer to REMOVING THE REAR OUTER WINDOW RECESS FINISHER STRIP .
• Refer to REMOVING REAR DOOR TRIM .
• Refer to REMOVING REAR DOOR WINDOW GLASS (FIXED) .

• Release the clips (1) of the window recess finisher strip (2) along the dashed line from the door with the special tool 2 298 505 .
• Start loosening the clips (1) in the front lower area of the door.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the clips (1) with the special tool 2 298 505 .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the clips (1) with the special tool 2 298 505 .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Pull the window cavity finisher strip (1) upwards out of the window cavity and remove from the door.

Courtesy of BMW OF NORTH AMERICA, INC.