Install striker for the tailgate latch
- Position striker for the tailgate latch (2) and tighten the screws (1).
TIGHTENING TORQUES SPECIFICATION
| Striker to trunk lid | ||
|---|---|---|
| Hexagon screw M8x20 |
Tightening torque | 19 Nm |
Follow-up work
- Refer to INSTALLING THE TAILGATE TRIM PANEL .
- Refer to ATTACHING THE TRIM PANEL FOR THE TAILGATE HINGE ON THE LEFT AND RIGHT .
- Refer to INSTALLING THE POWER TAILGATE SWITCH .
- Refer to INSTALLING TRUNK COMPARTMENT LIGHT ON TRUNK LID .