Installing the trunk lid lock

• Tighten down screws (2)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Trunk lid lock to body
  Hexagon screw M8x20	Tightening torque	19 Nm

• Connect plug (1)  .
• Version with Automatic Soft Close system: 

  Attach the Bowden cable (3)  .

  Connect plug (4)  .

• Version with emergency release: 

  Attach the Bowden cable (5)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to ADJUSTING TRUNK LID LOCK .