Removing the front module bracket

Preliminary work 

• Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
• Refer to REMOVING FRONT DOOR TRIM PANEL .

• Unlock and disconnect the electrical plug connections (1) and (2).
• Release the detents of the door wiring harness (3) on the front module bracket (4).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).
• Loosen nut (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Open the bayonet closures (1) by twisting them.
• Remove the front module bracket (2).

Courtesy of BMW OF NORTH AMERICA, INC.