Remove rear power windows
Preliminary work
- Refer to REMOVING THE REAR OUTER WINDOW RECESS FINISHER STRIP .
- Refer to RELEASING DOOR WINDOW AT REAR .
- Refer to REMOVING REAR DOOR TRIM .
- Refer to REMOVING THE MODULE BRACKET REARWARD .
- Refer to REMOVING REAR DOOR WINDOW GLASS .
- Refer to REMOVING REAR DOOR WINDOW GLASS (FIXED) .
- Refer to REMOVING THE DRIVE FOR THE ROLLER SUNBLINDS ON THE DOOR .
- Remove the seal plug (1).
- Release nut (1) with special tool 2 351 398
.
- Remove the seal plug (1).
- Release nut (1) with special tool 2 351 398
.
- Remove glue pads (1).
- Unlock plug connection (2) and disconnect.
- Loosen the nuts (1) with the special tool 0 496 726 (51 0 400) by counter-holding the bolt (2)
.
- Loosen the nuts (1) with the special tool 0 496 726 (51 0 400) by counter-holding the bolt (2)
.
- Feed the window regulator (1) out of the door.