Replace rest of the backrest
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVING REAR SEAT BACKREST .
- Refer to REMOVING THE BACKREST COVERING .
NOTE:
TECHNICAL INFORMATION
The heating mat is glued to the foam pad and cannot be dismantled non-destructively.
When replacing the heating mat, a new one must always be installed with a new foam pad.
The heating mat is glued to the foam pad and cannot be dismantled non-destructively.
When replacing the heating mat, a new one must always be installed with a new foam pad.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Replace the backrest facing.
Parts: Facing of the backrest
- Variant with seat heating:
- Position heating mat (1) on cushion (2) and align it.
- Form an adhesive bond between heating mat (1) and cushion (2).
Follow-up work
- Refer to INSTALLING THE BACKREST COVERING .
- Refer to REMOVING REAR SEAT BACKREST .
- Refer to INSTALLING THE REAR SEAT .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .