Install the right tail light on the trunk lid

• Connect and lock the connector (2) and position the tail light correctly on the tailgate (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace screws (1).

  Parts:  Screws

• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Tail light at trunk lid
  Oval-head screw M5x14 Replace screws.	Tightening torque	5.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE WATER CHANNEL ON THE TAIL LIGHT .
• Refer to INSTALLING THE TAILGATE TRIM PANEL .
• Refer to ATTACHING THE TRIM PANEL FOR THE TAILGATE HINGE ON THE LEFT AND RIGHT .
• Refer to INSTALLING THE POWER TAILGATE SWITCH .