Replacing the tail light on right side panel
NOTE:
Description is for left component only. Procedure on the right side is identical.
Replacing the tail light at the side panel
- Replace the rear light on the side panel.
Parts: Tail lamp
- Connect connectors (2) for the side panel tail light (1) and lock them.
- Position tail light on the side panel (1).NOTE: To provide a better overview: Schematic diagram with partially hidden components.
- Tighten nuts (1).TIGHTENING TORQUES SPECIFICATION
Side panel tail light to body hexagon nut M5 Tightening torque 3 Nm
Follow-up work
- Refer to PARTIALLY INSTALLING THE INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON RIGHT .
- Refer to INSTALLING THE TOP LUGGAGE COMPARTMENT TRIM PANEL .
- Refer to INSTALLING TRUNK COMPARTMENT LIGHT .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .