Remove the telematics control module

Precondition 

• Convertible top is open.

  Convertible top flap is in open position.

  Wind deflector is removed.

  Rear seat backrest is folded.

Preliminary work 

• Refer to REMOVING LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to REMOVING THE LOADING EDGE TRIM .
• Refer to LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
• Refer to REMOVING REAR SEAT BENCH .
• Refer to REMOVING THE SEAT BELT FINISHER STRIP .
• Refer to REMOVING REAR SIDE TRIM PANEL .
• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
• Refer to REMOVING THE TOP PARTITION PANEL TRIM PANEL .
• Refer to REMOVING THE PANEL OF THE LUGGAGE COMPARTMENT PARTITION WALL .

• Unlock and disconnect connector (1)  .
• Loosen nuts (2)  .
• Remove telematics control module (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.