Installing the storage shelf with roller sunblind
- If applicable, connect the plug connections.
- Insert the storage shelf with roller sunblind (3) towards the rear.
- Connect the plug connection (1).
NOTE:
Perform the steps on the right and left side.
- Tighten down screw (2).
TIGHTENING TORQUE SPECIFICATIONS
| Roller sunblind | ||
| Tightening torque | 8 Nm | |
Follow-up work
- Refer to INSTALLING THE REAR DECK OF THE COMFORT REAR SEAT .
- Refer to INSTALLING BOTH SEAT BELT FINISHER STRIP ELEMENTS .
- Refer to INSTALLING BOTH C-PILLAR TRIM PANELS .
- Refer to INSTALLING BOTH SEAT SURFACES .
- Refer to INSTALLING THE CENTRAL SEAT SURFACE .